Our Factory supplies Elevator Sheet Metal Part with carbon steel material with High Quality. We get involved in Elevator Industry for more than 7 years. Also we could design and production the Sundries Elevator use for Restaurant.
High Flow PLTYW Series Filter Cartridges are made from depth fine PP or GF non-woven fabrics.The filter has a big diameter of 6.3 inch/160mm and no inner core, single open, the inside to outside flow pattern ensure that all the particles will be intercept
1,Self-relieving structure:In case of an abnormal rise of pressure in the valve body cavity,a trunnion ball valve of a self-relieving seat design will automatically relieve excess pressure to the lower pressure side of the valve,while a trunnion ball valv
The casting has higher precision and surface finish, which greatly reduces the machining amount of the casting, greatly reduces labor intensity, and saves electricity and metal materials. Because of its higher internal and external quality.
Coat the spline of the outer universal joint (RF joint) with a 5mm protective agent D6, and then install the spline shaftAfter applying the protective agent, the drive shaft should be stopped for 60 minutes after installation before starting the car can b
For ferritic plus pearlitic gray iron. Its casting performance is good, the process is simple, the casting stress is small, does not need the artificial aging treatment, has certain mechanical strength and good vibration reduction performance.
Inconel 600 strip has good fatigue resistance, radiation resistance, oxidation resistance, corrosion resistance, and good processability, good welding performance.
The product is composed of a mask body, a nose clip and a mask band. The whole is made of non-woven fabric and has a three-layer structure. The inner and outer layers of the mask are non-woven fabrics. The middle filter material is melt-blown cloth.
Inconel 600 Coil have good fatigue resistance, radiation resistance, oxidation resistance, corrosion resistance, and good processability, good welding performance.
It can be polished and electroplated without pits, no water marks, no blistering, no sand holes, no water leakage, no air leakage, oxidation of various colors, and high precision ( (Accurate to + -0.02), high-pressure aluminum die-casting auto parts can b
Low tensile strength and plasticity, good casting performance and damping performance, mainly used for casting automobile engine cylinders, cylinder jackets, lathe beds and other pressure and vibration components.
Size: NPS1/2”to NPS8” (DN15 to DN200) Pressure Rating: ASME Class150 to Class2500 (PN16 to PN420) Body Material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Stainless Seat: Soft, Metal to Metal
This type of bolt is easy to tighten, easy to disassemble, and not easy to slip angle, which is very labor-saving when used. His appearance is round, with a concave hexagon in the middle.Combined with hexagon nuts to form a tightening effect.
We offer Tint golf cart windshields for Ezgo TXT.we have same supplier with madjax.Located in Shenzhen,our factory adjoining Yitian,convenient for transport,do hope to enter into business relationship with you in the near future.
Size: NPS1/2” to NPS2”(DN15 to DN50) Pressure Rating: ASME Class150 to Class2500 (PN16 to PN420) Body Material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Stainless Seat: Soft, Metal to Metal