a) Small size;b) Light weight;c) Low power consumption;d) High measurement accuracy;e) Products that can be used as ranging modules for short-range ranging needs.
304 stainless steel plate is a popular type of stainless steel plate that is commonly used in a variety of applications due to its corrosion-resistant properties. It is a non-magnetic, austenitic alloy that contains high levels of chromium and nickel, whi
This LB-82 folding box is made of corn starch. It is waterproof and oily, degradable, environmentally friendly and affordable. Welcome to inquire or purchase
Alloy ductile iron roll is characterized by the ball-shaped graphite in the matrix, through adjusting the compositions of Ni, Cr, Mo adopting different heat treatment technology, pearlitic ductile iron and acicular constitution and different performance o
Since the density of magnesium alloy is 1.8/cm3, its weight is very small. The parts of magnesium alloy have the following characteristics: light weight, high strength, high rigidity, good heat dissipation, greater ability to bear impact load than aluminu
The dielectric consists of low loss matellized poly propylene film and protective gas, capacitor have smaller dimension a long operation life, a high ac load capacity and can be installed n any position because of the gas dry construction.
1,Self-relieving structure:In case of an abnormal rise of pressure in the valve body cavity,a trunnion ball valve of a self-relieving seat design will automatically relieve excess pressure to the lower pressure side of the valve,while a trunnion ball valv
The casting has higher precision and surface finish, which greatly reduces the machining amount of the casting, greatly reduces labor intensity, and saves electricity and metal materials. Because of its higher internal and external quality.
Coat the spline of the outer universal joint (RF joint) with a 5mm protective agent D6, and then install the spline shaftAfter applying the protective agent, the drive shaft should be stopped for 60 minutes after installation before starting the car can b
The product is composed of a mask body, a nose clip and a mask band. The whole is made of non-woven fabric and has a three-layer structure. The inner and outer layers of the mask are non-woven fabrics. The middle filter material is melt-blown cloth.
Size: NPS1/2”to NPS8” (DN15 to DN200) Pressure Rating: ASME Class150 to Class2500 (PN16 to PN420) Body Material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Stainless Seat: Soft, Metal to Metal